DN15–25 DN15–50 DN15–100 DN50–200 DN50–300

DN15–100 Fully Automatic Water Meter Test Bench (Volumetric Method) - KINMY

DN15–100 Fully Automatic Water Meter Test Bench (Volumetric Method)

Name: DN15–100 Water Meter Bench – Volumetric | KINMY
SKU: KINMY-KT-7181815

Request Specifications

Tell us the meter size, test method and required testing capacity.

DN15–100 water meter test bench, volumetric, fully automatic. Request configuration details from KINMY.

Nominal Diameter: DN15–100
Test Method: Volumetric Method
Automation: Fully Automatic

SKU: KINMY-KT-7181815

Category: DN15–100, Water Meter Test Bench Series

Tags: Fully Automatic, Volumetric Method

Overview

DN15–100 Fully Automatic Water Meter Test Bench (Volumetric Method) is listed in the KINMY Water Meter Test Bench Series range with a configuration identified by DN15–100, Volumetric Method, Fully Automatic. Contact KINMY for a project-specific specification sheet and quotation.

Configuration

Nominal Diameter	DN15–100
Test Method	Volumetric Method
Automation	Fully Automatic

Measurement and Test Methods

Measurement principles	Volumetric Method
Reference flow range	0.010–130 m³/h
Measurement modes	Start-Stop Method, Reversal Method

Reference Standards and Instruments

Reference equipment listed for this catalog configuration. The supplied instrument set is confirmed with the project specification.

Volumetric reference instruments	Volumetric measuring vessels

Product Highlights

High Production Efficiency: 100 water meters can be tested in eight hours.
Fast Input Method: Wireless barcode scanner input of meter numbers—fast, accurate, and convenient.
Energy Saving and Consumption Reduction: Saves water, electricity, and labor.
Compact Size: Saves space, fully automated, shares a network, and reduces auxiliary materials.
Novel Structure: European standard aluminum profile frame, 304 stainless steel piping, novel and stylish appearance.

Reference Specifications

Measurement Uncertainty	Urel≤0.2% (k=2)
Flow Stability	1.0% for Start-Stop Method; 0.2% for Other Methods
Calibration Medium	Pure Tap Water
Operating Humidity	≤ 93% RH
Operating Water Temperature	20℃ ± 10℃
Device Operating Temperature	4˜50℃
Water Source Operating Pressure	0.0-0.5 MPa (Adjustable)
Air Source Operating Pressure	0.4-0.7 MPa
Number of Meters Under Test	DN15: 10 units \| DN20: 8 units \| DN25: 6 units \| DN40, DN50, DN65: 5 units \| DN80, DN100: 3 units
Meter Clamping Mechanism	Dual-Cylinder External-Push Tandem Meter Clamping Device; Single Pneumatic Clamping Device for 10 Front 5 Rear Positions
Vacuum System	Differential-Pressure Vacuum Generator, Vacuum Priming, Maintains Water Meters in Full-Water State
Supported Test Modes	Fully Automatic, Semi-Automatic, Touchscreen Manual

Utilities and System Configuration

Water pump configuration	H=20 m; Q=2 m³/h; P=0.5 kW, 1 unit \| H=30 m; Q=40 m³/h; P=7.5 kW, 1 unit \| H=30 m; Q=180 m³/h; P=22 kW, 1 unit
Water tank capacity	15000 L
Flow diverter	DN25 DN100 Cross-Type Pneumatic Open Reversers, Low Noise High Sensitivity, Stroke Difference 10 ms, Uncertainty ≤ 0.002%
Timing system	(10-100) kHz (Adjustable); Accuracy Better Than 10⁻⁶
Pulse acquisition signal	Pulse, f = (0˜10) kHz
Data acquisition hardware	5 Mobile Phones (50 MP Pixels, 8G/128G Storage)
Tightness test pressure range	(0˜2.0) MPa

Request Specifications

Final configuration, test range and supplied components can vary by project and selected method. Please send your meter sizes, required test method and expected testing capacity for confirmation.